Setup Guide

28ﻝﻳﻐﺷﺗﻟﺍ ءﺩﺑ ﻝﻳﻟﺩ
Step 5:
Finally, set up the default gateway. Please enter the
IP address of the gateway from which this network is
reachable. [0.0.0.0]: 10.1.1.1
This is the configuration information that has been
collected:
SNMP Interface = “public”@10.1.2.100
User Account setup = admin
Password = ********
VLAN1 Router Interface IP = 10.1.1.200 255.255.255.0
Default Gateway = 10.1.1.1
Step 6:
If the information is correct, please enter (Y) to
save the configuration and copy the settings to the
start-up configuration file. If the information is
incorrect, enter (N) to discard the configuration and
restart the wizard: [Y/N] y
Thank you for using the Dell Easy Setup Wizard. You
will now enter CLI mode.
Applying Interface configuration, please wait...
ﺔﻳﻟﺎﺗﻟﺍ ﺕﺍﻭﻁﺧﻟﺍ
ﺔﻳﻣﺎﻣﻷﺍ ﺔﺣﻭﻠﻟﺍ ﻲﻓ ﻝﻭﺣﻣﻟﺍ ﺫﻓﺎﻧﻣ ﻥﻣ
ٍ
ﻱﺃ ﻝﻳﺻﻭﺗﺑ ﻡﻗ ،ﻡﺳﻘﻟﺍ ﺍﺫﻫ ﻲﻓ ﺔﻓﻭﺻﻭﻣﻟﺍ ﺔﻳﺋﺩﺑﻣﻟﺍ ﺔﺋﻳﻬﺗﻟﺍ ﻡﺎﻣﺗﺇ ﺩﻌﺑ
.ﻕﺎﻁﻧﻟﺍ ﻝﺧﺍﺩ ﺩﻌﺑ ﻥﻋ ﺓﺭﺍﺩﻺﻟ ﺝﺎﺗﻧﺇ ﺔﻛﺑﺷﺑ
ﺩﻳﺩﺣﺗﺑ ﺕﻣﻗ ﺍﺫﺇDHCP ﻥﺍﻭﻧﻌﻟ IP ﺓﺭﺍﺩﺇ ﺔﻬﺟﺍﻭﻟ VLAN 1 ﻥﺍﻭﻧﻋ ﺔﻬﺟﺍﻭﻟﺍ ﺏﺳﺗﻛﺗ ﻑﻭﺳ ،IP
ﻡﺩﺎﺧ ﻥﻣ ﺎﻬﺑ ﺹﺎﺧﻟﺍDHCP ﻥﺍﻭﻧﻋ ﻑﺎﺷﺗﻛﻻ .ﺔﻛﺑﺷﻟﺍ ﻰﻠﻋ IP ﻝﺎﺻﺗﺍ ﻡﺩﺧﺗﺳﺍ ،ﺎ
ً
ﻳﻛﻳﻣﺎﻧﻳﺩ ﺹﺻﺧﻣﻟﺍ
:ﻲﻟﺎﺗﻟﺍ ﺭﻣﻷﺍ ﺭﺍﺩﺻﻹ ﻡﻛﺣﺗﻟﺍ ﺓﺩﺣﻭ ﺫﻔﻧﻣ
• ﻪﻳﺟﻭﺗ ﺔﻬﺟﺍﻭﻟVLAN 1 ﻝﺧﺩﺃ ، show ip interface ﺔﻬﺟﺍﻭ ﺭﺎﻬﻅﺇ) IP( .