Reference Guide

BondingModeEnum
Bond mode.
LACP
Uses an IEEE 802.3ad dynamic link aggregation policy. Aggregation groups share the same speed
and duplex settings. This mode transmits and receives network traffic on all slaves in the active
aggregator.
Type : enum (LACP)
CGImportableCriteriaEnum
Consistency group import criteria. Values are:
Ready
The consistency group is ready for nondisruptive import.
Ready_For_Agentless_Import
The consistency group is ready for agentless import.
In_Progress
Import is in progress.
Members_Not_Ready
The member or members of teh consistency group are not ready for import.
No_Members
There are no members in the consistency group.
Max_Members
The maximum number of members for a consistency group has been exceeded.
Not_In_Sync
The array must be refreshed.
Imported
Import is complete.
Incompatible_Firmware
The software version on the source array is not compatible.
Undetermined
The import status cannot be determined due to an internal error. Contact technical support.
Type : enum (Ready, Ready_For_Agentless_Import, In_Progress, Members_Not_Ready, No_Members,
Max_Members, Not_In_Sync, Imported, Incompatible_Firmware, Undetermined)
248
Dell EMC PowerStore REST API Reference Guide