Release Notes

8 Known Issues
Issue ID Functional
Area
Description Workaround/Resolution
MDT-148659
Install or
Upgrade
If the peer node is inaccessible for too
long, the software upgrade can fail.
Retry the software upgrade.
MDT-146346
Notifications and
Alerts
Some hardware alert states may persist
for a short time after the health of the
object has been restored. The alert states
eventually resolve with the correct state.
None
MDT-153335 PowerStore CLI
The PowerStore CLI does not show all the
required information for metrics when a
roll-up result is returned for long interval
values.
It is recommended that you use the REST
interface to query metrics. You can also use
any REST client (cURL, Insomnia, Postman,
etc.) or web browser.
MDT-118394
PowerStore
Manager(GUI)
Uploading an upgrade package that is
larger than 4 GB with Microsoft Edge or
Internet Explorer fails.
Try again with a different browser.
MDT-86305
PowerStore
Manager(GUI)
When you power down a node in
PowerStore Manager, the screen does not
automatically refresh the state to indicate
that the node is getting powered off.
On the Hardware tab, click the Refresh icon
(appears on the top right corner of the tab,
next to the base enclosure image) or refresh
the browser page.
MDT-142069
PowerStore
Manager(GUI)
There are situations when the system is
Out of Space where the UI is unable to
update its statistics. This situation will be
evident by a red banner on the top of the
screen. You may see objects in the UI that
are incorrectly displayed as "0 MB/GB/TB"
due to the inability for the UI to query for
system statistics.
None
MDT-145344
PowerStore
Manager(GUI)
While performing a Refresh Using Related
Volume or Volume Group operation, you
might receive an exception error when
you select Choose One from the drop-
down before you click Refresh. If this
occurs, you must restart PowerStore
Manager.
When refreshing a resource, do not select
the "Choose One" entry in the Refresh from
Volume/Volume Group drop-down.
MDT-163489
PowerStore
Manager(GUI)
Once a node is replaced, the new node
hardware information does not appear in
PowerStore Manager immediately.
After replacing a node, wait up to 30
minutes for the PowerStore Manager screen
to reflect the update.
MDT-130894
PowerStore REST
API
Two invalid resource_types, FEPort and
Initiator, may be returned by the event
and alert APIs.
Events or alerts with resource_type FEPort
or Initiator should ignore the resource_type
values.
External OpenAPI clients must disable
validation for the event and alert APIs with
resource_types of FEPort or Initiator.