Reference Guide

Mode Normal
Usage Service
Requires service user password? No
Requires root privileges? No
May cause data unavailability? Yes
May cause data loss? No
Scope Node
Prerequisites None
Format
svc_storage_integrity_check [-h] [--status] [--set <value>][--start] [--clear <value>]
[--complete] [--list_faulted_cp_objects] [--service_lost_and_found] [--file_recovery] [--
block_recovery] [--list_faulted_volumes] [--dpcli] [--repair_layered_services]
Optional arguments
Qualifier Description
-h, --help Show the help message and exit.
--status
Check the status of the storage integrity check operation.
--set
Set the DL bit for an object.
--start
Begin the storage integrity check.
--clear
Clear DL bits.
--complete
Complete the storage integrity check operation.
--list_faulted_cp_objects
List faulted CP volumes, virtual volumes, snapshots, or clones.
--service_lost_and_found
Move or delete volumes in the lost and found after a storage integrity
check operation.
--list_cleared_file_volumes_marked_dl
Attempt file recovery after a storage integrity check operation.
--block_recovery
Attempt block recovery after a storage integrity check operation.
--list_faulted_volumes
List volumes from the fault store.
--dpcli
List a DP CLI command.
--repair_layered_services
Repair DP layered services using a CP copier or mirror configuration.
View capacity metrics (svc_volume_space_metrics)
This script shows you detailed information about the available space on volume families. You can use the arguments to specify
how you want the information to be displayed.
This script is primarily used when the appliance is out of space (OOS). If the appliance is not in the OOS state, you can force
the operation.
Service Commands
75