Release Notes

4 Resolved Issues
Issue ID Functional Area Description
MDT-155853 Monitoring
If there is a critical capacity-based forecasting alert, a migration recommendation
repair flow can be used to migrate storage to another appliance. It is possible that
after migration completes, the daily forecast used to trigger the alert will not be
updated on the source appliance and the alert will not be cleared until the next
daily forecast. After the forecast is triggered again, the capacity based forecast on
the source and destination appliance may be inaccurate as a significant amount of
storage is migrated
MDT-134036 Monitoring
When there is a contention of resources, the performance policy associated with
the volume gets applied. In the current release, you may not notice much
difference between the High and Medium performance policies. For volumes with
Low performance policy, expect to see a noticeable difference in the amount of
I/O operations serviced as compared to volumes with High or Medium
performance policies.
MDT-153140
PowerStore
Manager(GUI)
The Check for software upgrade option cannot be selected from the ? icon in the
top right of PowerStore manager.
MDT-144836 Storage - File
If a snapshot expiration is in progress when the NAS Server has stopped due to
issues such as Failover, Failback, or the NAS server is being moved to another
node, then a "NAS node [nodename] is down," alert is displayed in PowerStore
Manager and NAS management operations become unavailable.
MDT-149396 Support
If an event or issue abruptly interrupts the node while the node, appliance, or
cluster is powering off, the node may not complete powering off and a reboot
may occur instead.
MDT-153919 SupportAssist
In multi-appliance clusters, data collections taken on a peer appliance may not be
automatically uploaded to SupportAssist.
MDT-163759 SupportAssist
Configuring SupportAssist for Gateway Connect with remote access to gateways
running SupportAssist 4.0.5 fails on appliances with operating systems earlier than
1.0.1.0.5.002.