Reference Guide

Table 7. Supported video resolution options
Resolution Refresh rate (Hz) Color depth (bits)
640 x 480 60, 70 8, 16, 32
800 x 600 60, 75, 85 8, 16, 32
1024 x 768 60, 75, 85 8, 16, 32
1152 x 864 60, 75, 85 8, 16, 32
1280 x 1024 60, 75 8, 16, 32
1440 x 900 60 8, 16, 32
Environmental specifications
NOTE: For additional information about environmental certifications, please refer to the Product Environmental
Datasheet located with the Manuals & Documents on www.dell.com/poweredgemanuals
Table 8. Temperature specifications
Temperature Specifications
Storage –40°C–70°C (–40°F–158°F) per Mil-Std 810G Method 501.6, Proc 1
Continuous operation (for altitude less than 950 m or 3117
ft)
5°C–45°C (41°F–104°F), with no direct sunlight on the equipment
Fresh air For information about fresh air, see Expanded Operating Temperature
section.
Excursion temperature 55°C per Mil-Std 810G Method 501.6 Proc II
NOTE: Configuration restrictions will apply. For more
information, contact DellEMC sales support representative.
Maximum temperature gradient (operating and storage) 20°C/h (68°F/h)
Table 9. Relative humidity specifications
Relative humidity Specifications
Storage 5% to 95% RH with 33°C (91°F) maximum dew point Atmosphere must be
noncondensing at all times.
Operating 5% to 85% relative humidity with 29°C (842°F) maximum dew point
Table 10. Maximum vibration specifications
Maximum vibration Specifications
Operating Random vibration per Mil-Std 810G method 514.7, 0.00220783
g
2
/Hz at 10
Hz to 500 Hz (overall 1.04
rms
), all 3 axes, 1 hour per axis
Storage Mil-Std 810G Procedure I, Cat 4, Fig 514.7 C-1 (US highway truck vibration),
1 hour per axes
Table 11. Maximum shock specifications
Maximum shock Specifications
Operating Mil-Std 810G method 516.7, Proc I, 40G, 11 ms, 3 shocks in +/- directions in
3 axes (total 18 shocks)
Storage Mil-Std 810G method 516.7, Proc I, 40G, 11 ms, 3 shocks in +/- directions in
3 axes (total 18 shocks)
PowerEdge XR2 technical specifications 9