Users Guide

○ The uploaded configurations are saved in the default database.
● Save current settings as custom defaults —
○ This operation saves the current settings as default settings.
● Download custom default settings —
○ You can download config.XML for all the default settings.
● Initiate reset to custom defaults —
○ The uploaded/saved default settings are applied.
Resetting iDRAC using iDRAC web interface
To reset iDRAC, do one of the following in the iDRAC Web interface:
● Upload Custom Defaults file:
○ Go to Configuration > Server Configuration Profile > Custom Defaults > Upload Custom Defaults
○ Upload the customized CustomConfigured.xml file from Local Share path
○ Click Apply. New Upload Custom Defaults Job is created.
● Reset to Custom Defaults:
○ When Upload Custom Defaults job is successful, go to Maintainance > Diagnostics, click Reset iDRAC to Factory
Defalts option.
○ Select Discard all settings and set to Custom default configuration.
○ Click Continue to initiate Reset to customs Defaults configuration.
Resetting iDRAC using RACADM
To restart iDRAC, use the racreset command. For more information, see the Guía de la CLI de RACADM de la controladora
de administración del chasis disponible en https://www.dell.com/cmcmanuals .For more information, see the Guía de la CLI de
RACADM de OME - Modular para el chasis PowerEdge MX7000 disponible en https://www.dell.com/openmanagemanuals
For Reset to default operations, use the following commands:
● Upload Custom Defaults file — racadm –r <iDracIP> -u <username> -p <Password> set -f <filename>
-t xml --customdefaults
● Save Current Settings as Default settings — racadm –r <iDracIP> -u <username> -p <Password> set
--savecustomdefaults
● Download Custom Default settings — racadm –r <iDracIP> -u <username> -p <Password> get -f
<filename> -t xml --customdefaults
● Reset to Custom Defaults — Racadm –r <iDracIP> -u <username> -p <Password> racresetcfg -custom
Borrado de datos del sistema y del usuario
NOTA: El borrado de datos del sistema y del usuario no se admite en la interfaz gráfica de usuario de la iDRAC.
Puede borrar componentes del sistema y datos del usuario para los siguientes componentes:
● Datos de Lifecycle Controller
● Diagnósticos incorporados
● Driver Pack para el sistema operativo incorporado
● Restablecimiento de los valores predeterminados del BIOS
● Restablecimiento de los valores predeterminados de iDRAC
Antes de llevar a cabo el borrado del sistema, asegúrese de que:
● Cuenta con el privilegio de control del servidor de iDRAC.
● Lifecycle Controller está activado.
362
Solución de problemas de Managed System mediante iDRAC