Users Guide

○ You can upload custom defaults settings file. This file can be obtained by exporting config XML. The contents of the file
can be modified by customer to add or delete the settings.
○ You can upload XML file using iDRAC GUI, RACADM, or Redfish.
○ The uploaded configurations are saved in the default database.
● Save current settings as custom defaults —
○ This operation saves the current settings as default settings.
● Download custom default settings —
○ You can download config.XML for all the default settings.
● Initiate reset to custom defaults —
○ The uploaded/saved default settings are applied.
Resetting iDRAC using iDRAC web interface
To reset iDRAC, do one of the following in the iDRAC Web interface:
● Upload Custom Defaults file:
○ Go to Configuration > Server Configuration Profile > Custom Defaults > Upload Custom Defaults
○ Upload the customized CustomConfigured.xml file from Local Share path
○ Click Apply. New Upload Custom Defaults Job is created.
● Reset to Custom Defaults:
○ When Upload Custom Defaults job is successful, go to Maintainance > Diagnostics, click Reset iDRAC to Factory
Defalts option.
○ Select Discard all settings and set to Custom default configuration.
○ Click Continue to initiate Reset to customs Defaults configuration.
Resetting iDRAC using RACADM
To restart iDRAC, use the racreset command. For more information, see the Chassis Management Controller RACADM CLI –
Handbuch verfügbar unter https://www.dell.com/cmcmanuals .For more information, see the OME - Modular für PowerEdge
MX7000-Gehäuse RACADM CLI – Handbuch verfügbar unter https://www.dell.com/openmanagemanuals
For Reset to default operations, use the following commands:
● Upload Custom Defaults file — racadm –r <iDracIP> -u <username> -p <Password> set -f <filename>
-t xml --customdefaults
● Save Current Settings as Default settings — racadm –r <iDracIP> -u <username> -p <Password> set
--savecustomdefaults
● Download Custom Default settings — racadm –r <iDracIP> -u <username> -p <Password> get -f
<filename> -t xml --customdefaults
● Reset to Custom Defaults — Racadm –r <iDracIP> -u <username> -p <Password> racresetcfg -custom
Löschen von System- und Nutzerdaten
ANMERKUNG: Löschen von System- und Nutzerdaten wird von iDRAC-GUI nicht unterstützt.
Sie können System-Komponente(n) und die Nutzerdaten für die folgenden Komponenten löschen:
● Lifecycle-Controller-Daten
● Integrierte Diagnosefunktionen
● Integriertes BS-Treiberpaket
● Zurücksetzen des BIOS auf die Standardeinstellungen
● Zurücksetzen des iDRAC auf die Standardeinstellungen
Stellen Sie vor der Durchführung einer Systemlöschung Folgendes sicher:
● Sie verfügen über iDRAC-Serversteuerung-Berechtigungen.
● Lifecycle Controller ist aktiviert.
366
Fehler auf Managed System über iDRAC beheben