User`s guide
_____________________________________________________________________
Opengear Application Note: SDTConnector + Dell Page 11 of 14
Remove any Permitted Services you do not require, select the TCP button and enter Port 1311 and click Add. Enter Port
3668 and click Add. Scroll to the bottom of the page and click Apply
From the Serial & Network menu, select Users & Groups. If you have not already, click Add User, otherwise Edit the
user and skip to the next paragraph. Enter a Username for the new user, e.g. delladmin. Enter and confirm a gateway
Password for this user. Note that this is separate from the operating system password
In Accessible Host(s), select the IP address for the PowerEdge (192.168.0.10). Click Apply.
Configuring SDTConnector to connect to Server Administrator
Install and launch SDTConnector (1.2.x or later) on the client PC. If you haven't previously added the Opengear gateway:
Select File -> New Gateway
Enter the IP address through which the Opengear unit/management LAN gateway is accessible to this client PC (e.g.
192.168.0.1). Enter the gateway username (e.g. delladmin) and password you set in the previous step. Click OK
Once you have an Opengear gateway connection in place you need to establish a connection to the PowerEdge through that
gateway:
Right click on the Opengear gateway and select New Host. Enter the PowerEdge's IP address (192.168.0.10) in Host
Address. Select the Dell Server Administrator (or Dell OpenManage if it doesn't exist) service and click OK.
Connecting to Server Administrator
Select the newly created host and click the Dell Server Administrator button. A browser window with the Server Administrator
login is displayed. Login using your operating system username (e.g. Administrator) and password.
6. Connecting to OpenManage IT Assistant server
IT Assistant is Dell's tool for monitoring the status of systems on your network. It is designed to help administrators efficiently
manage their IT environments, and can automatically recognize warnings, critical alerts, and other events sent by Dell
PowerEdge servers and generate notifications based on configurable event filters.
The IT Assistant software may be installed on any system on the management network, or on the PowerEdge server itself, as in
the example below. IT Assistant can be accessed remotely using its web browser based interface.