Setup Guide

Hardware Overview 9
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell
Plasma\GSG\Plasma_GSGHardwareOverview.fm
DELL CONFIDENTIAL – PRELIMINARY 1/16/14 - FOR PROOF ONLY
tengigabitethernet group/port_number or te group/port_number
In addition, the switch supports an Out-of-Band (OOB) port that is connected
to the management network of the chassis.
Port Types
The following ports are found on the R1-2401 switch:
• 24 x 1G Ethernet Ports. These consist of:
– 8 external ports—Connected to network (visible when the switch is in
the chassis)
– 16 internal ports—Connected to blade servers (not visible when the
switch is in the chassis)
• 1 Out-of-Band port (this port is the same as used for CMC)
The following ports are found on the R1-2210 switch:
• 20 x 10G Ethernet Ports. These consist of:
– 4 external ports—Connected to network (visible when the switch is in
the chassis)
– 16 internal ports—Connected to blade servers (not visible when the
switch is in the chassis)
• 2 x 1G Ethernet Ports
• 1 Out-of-Band port (this port is the same as used for CMC)
Table 2-1 and Table 2-2 map the hardware network port numbers to the
software interface port numbers and describe how they are referred to in the
CLI/GUI (short version) for the R1-2401 and the R1-2210, respectively:
Table 2-1. R1-2401 Port Mapping Table
Port Type and Number Software Port Naming Convention in
CLI/WEB
External 1G ports 1-8 gi0/1.... gi0/8
Internal 1G ports 1-4 gi1/1.... gi1/4
Internal 1G ports 5-8 gi2/1.... gi2/4
Internal 1G ports 9-12 gi3/1.... gi3/4
Internal 1G ports 13-16 gi4/1.... gi4/4
Out-of-Band port oob