Reference Guide

System Management Commands 93
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\System_Management.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
The following are characters that can appear in the traceroute command
output:
telnet
The telnet EXEC mode command logs on to a host that supports Telnet.
Syntax
telnet { ip-address | hostname } [ port ] [ keyword ...]
Parameters
• ip-address — Specifies the destination host IP address (IPv4 or IPv6).
•
hostname — Specifies the destination host name. (Length: 1-160
characters. Maximum label size for each part of the host name: 58.)
•
port — Specifies the decimal TCP port number or one of the keywords
listed in the Ports table in the User Guidelines.
•
keyword —Specifies the one or more keywords listed in the Keywords table
in the User Guidelines.
Field Description
* The probe timed out.
? Unknown packet type.
A Administratively unreachable. Usually, this output indicates that an
access list is blocking traffic.
F Fragmentation required and DF is set.
H Host unreachable.
N Network unreachable.
PProtocol unreachable.
QSource quench.
R Fragment reassembly time exceeded
S Source route failed.
U Port unreachable.