Reference Guide

90 System Management Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\System_Management.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
64 bytes from FF02::1: icmp_seq=2. time=1050 ms
64 bytes from FF02::1: icmp_seq=3. time=0 ms
64 bytes from FF02::1: icmp_seq=3. time=70 ms
64 bytes from FF02::1: icmp_seq=4. time=0 ms
64 bytes from FF02::1: icmp_seq=3. time=1050 ms
64 bytes from FF02::1: icmp_seq=4. time=70 ms
64 bytes from FF02::1: icmp_sq=4. time=1050 ms
---- FF02::1 PING Statistics----
4 packets transmitted, 12 packets received
traceroute
To display the routes that packets will take when traveling to their
destination, use the traceroute EXEC mode command.
Syntax
traceroute ip {ipv4-address | hostname} [size packet_size] [ttl max-ttl]
[count packet_count] [timeout time_out] [source ip-address] [tos tos
]
traceroute ipv6
{ipv6-address | hostname} [size packet_size] [ttl max-ttl]
[count packet_count] [timeout time_out] [source ip-address] [tos tos
]
Parameters
• ip —Use IPv4 to discover the route.
•
ipv6 —Use IPv6 to discover the route.
•
ipv4-address —IPv4 address of the destination host.
•
ipv6-address —IPv6 address of the destination host.
•
hostname —Hostname of the destination host. (Length: 1-160 characters.
Maximum label size for each part of the host name: 58.)
•
size packet_size —Number of bytes in the packet not including the VLAN
tag. The default is 64 bytes. (IPv4:64-1518, IPv6: 68-1518)
•
ttl max-ttl —The largest TTL value that can be used. The default is 30.
The
traceroute command terminates when the destination is reached or
when this value is reached. (Range: 1–255)