Reference Guide

ACL Commands 729
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
Parameters
protocol
—The name or the number of an IP protocol. Available protocol
names: icmp, igmp, ip, tcp, egp, igp, udp, hmp, rdp, idpr, ipv6, ipv6:rout,
ipv6:frag, idrp, rsvp, gre, esp, ah, ipv6:icmp, eigrp, ospf, ipinip, pim, l2tp,
isis. To match any protocol, use the Ip keyword. (Range: 0–255)
source
—Source IP address of the packet.
source-wildcard
—Wildcard bits to be applied to the source IP address.
Use 1s in the bit position that you want to be ignored.
destination
—Destination IP address of the packet.
destination-wildcard
—Wildcard bits to be applied to the destination IP
address. Use 1s in the bit position that you want to be ignored.
dscp
number
—Specifies the DSCP value.
precedence
number
—Specifies the IP precedence value.
icmp-type
—Specifies an ICMP message type for filtering ICMP packets.
Enter a number or one of the following values: echo-reply, destination-
unreachable, source-quench, redirect, alternate-host-address, echo-
request, router-advertisement, router-solicitation, time-exceeded,
parameter-problem, timestamp, timestamp-reply, information-request,
information-reply, address-mask-request, address-mask-reply, traceroute,
datagram-conversion-error, mobile-host-redirect, mobile-registration-
request, mobile-registration-reply, domain-name-request, domain-name-
reply, skip, photuris. (Range: 0–255)
icmp-code
—Specifies an ICMP message code for filtering ICMP packets.
(Range: 0–255)
igmp-type
—IGMP packets can be filtered by IGMP message type. Enter a
number or one of the following values: host-query, host-report, dvmrp,
pim, cisco-trace, host-report-v2, host-leave-v2, host-report-v3. (Range:
0–255)
destination-port
—Specifies the UDP/TCP destination port. You can enter
range of ports by using hyphen. E.g. 20 - 21. For TCP enter a number or
one of the following values: bgp (179), chargen (19), daytime (13), discard
(9), domain (53), drip (3949), echo (7), finger (79), ftp (21), ftp-data (20),
gopher (70), hostname (42), irc (194), klogin (543), kshell (544), lpd (515),
nntp (119), pop2 (109), pop3 (110), smtp (25), sunrpc (1110, syslog (514),
tacacs-ds (49), talk (517), telnet (23), time (37), uucp (117), whois (43),