Reference Guide

640 DHCP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DHCP_Snooping.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
Syntax
ip arp inspection logging interval { seconds | infinite}
no ip arp inspection logging interval
Parameters
• seconds —Specifies the minimum time interval between successive ARP
SYSLOG messages. A 0 value means that a system message is immediately
generated. (Range: 0–86400)
•
infinite —Specifies that SYSLOG messages are not generated.
Default Configuration
The default minimum ARP SYSLOG message logging time interval is 5
seconds.
Command Mode
Global Configuration mode
Example
The following example sets the minimum ARP SYSLOG message logging
time interval to 60 seconds.
console(config)# ip arp inspection logging interval 60
show ip arp inspection
Use the show ip arp inspection EXEC mode command to display the ARP
inspection configuration for all interfaces or for a specific interface.
Syntax
show ip arp inspection [ interface-id ]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.