Reference Guide

IGMP Snooping Commands 591
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
Example
The following example define IP address 10.5.234.205 as the Querier
Snooping IP address on a VLAN if it is not configured for the VLAN
console(config)# ip igmp snooping querier address
10.5.234.205
ip igmp snooping vlan querier
Use the ip igmp snooping vlan querier Global Configuration mode
command to enable the IGMP Snooping querier on a specific VLAN. Use the
no form of this command to disable the IGMP Snooping querier on a VLAN
interface.
Syntax
ip igmp snooping vlan vlan-id querier
no ip igmp snooping
vlan vlan-id querier
Parameters
• vlan-id —Specifies the VLAN.
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
The IGMP Snooping querier can be enabled on a VLAN only if IGMP
Snooping is enabled for that VLAN.
Example
The following example enables the IGMP Snooping querier on VLAN 1:
console(config)# ip igmp snooping vlan 1 querier