Reference Guide

550 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
• Defines VID 100 as the PVID
console(config)# interface gi0/4
console(config-if)# switchport mode general
console(config-if)# switchport general allowed vlan add 2-3
tagged
console(config-if)# switchport general allowed vlan add 100
untagged
console(config-if)# switchport general pvid 100
console(config-if)# exit
switchport general ingress-filtering disable
Use the switchport general ingress-filtering disable Interface Configuration
mode command to disable port ingress filtering (no packets are discarded at
the ingress) on a general port. Use the no form of this command to restore the
default configuration.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Parameters
N/A
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example disables port ingress filtering on gi0/1.
console(config)# interface gi0/1
console(config-if)# switchport mode general