Reference Guide

548 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
VLANs to/from a general port and configure whether packets on the egress are
tagged or untagged. Use the no form of this command to reset to the default.
Syntax
switchport general allowed vlan {add | remove} vlan-list [tagged |
untagged]
no switchport general allowed vlan
Parameters
• add vlan-list —List of VLAN IDs to add. Separate nonconsecutive VLAN
IDs with a comma and no spaces. Use a hyphen to designate a range of
IDs. (range: 1–4094)
•
remove vlan-list —List of VLAN IDs to remove. Separate nonconsecutive
VLAN IDs with a comma and no spaces. Use a hyphen to designate a range
of IDs.
•
tagged —Specify that packets are transmitted tagged for the configured
VLANs
•
untagged —Specify that packets are transmitted untagged for the
configured VLANs (this is the default)
Default Configuration
The port is not a member of any VLAN.
Packets are transmitted untagged.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
If the interface is a forbidden member of an added VLAN, the interface does
not become a member of this specific VLAN. There will be an error message
in this case ("An interface cannot become a a member of a forbidden VLAN.
This message will only be displayed once.") and the command continues to
execute in case if there are more VLANs in the vlan-list.
The configuration is applied only when the port mode is general.