Reference Guide

User Interface Commands 53
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\User_Interface.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
Command Mode
Line Configuration Mode
User Guidelines
This command enables saving user-entered commands for a specified line.
You can return to previous lines by using the up or down arrows.
It is effective from the next time that the user logs in via console/telnet/ssh.
The following are related commands:
•Use the terminal history size User EXEC mode command to enable or
disable this command for the current terminal session.
•Use the history size Line Configuration Mode command to set the size of
the command history buffer.
Example
The following example enables the command for Telnet.
console(config)# line telnet
console(config-line)# history
history size
The history size Line Configuration Mode command changes the maximum
number of user commands that are saved in the history buffer for a particular
line. Use the no form of this command to reset the command history buffer
size to the default value.
Syntax
history size number-of-commands
no history size
Parameters
number-of-commands—Specifies the number of commands the system
records in its history buffer.