Reference Guide

Template Last Updated - 2/7/2007 Spanning-Tree Commands 491
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
30
Spanning-Tree Commands
spanning-tree
Use the spanning-tree Global Configuration mode command to enable
spanning-tree functionality. Use the no form of this command to disable the
spanning-tree functionality.
Syntax
spanning-tree
no spanning-tree
Parameters
N/A
Default Configuration
Spanning-tree is enabled.
Command Mode
Global Configuration mode
Example
The following example enables spanning-tree functionality.
console(config)# spanning-tree
spanning-tree mode
Use the spanning-tree mode Global Configuration mode command to select
which Spanning Tree Protocol (STP) protocol to run. Use the no form of this
command to restore the default configuration.