Reference Guide

LLDP Commands 477
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
PPVIDs:
VLANs:
Protocols:
The following table describes the significant fields shown in the display:
show lldp med configuration
Use the show lldp med configuration Privileged EXEC mode command to
display the LLDP Media Endpoint Discovery (MED) configuration for all
ports or for a specific port.
Syntax
show lldp med configuration [interface-id | detailed ]
Field Description
Timer The time interval between LLDP updates.
Hold multiplier The amount of time (as a multiple of the timer interval) that the
receiving device holds a LLDP packet before discarding it.
Reinit timer The minimum time interval an LLDP port waits before re-
initializing an LLDP transmission.
Tx delay The delay between successive LLDP frame transmissions initiated by
value/status changes in the LLDP local systems MIB.
Port The port number.
State The port’s LLDP state.
Optional TLVs Optional TLVs that are advertised. Possible values are:
PD - Port description
SN - System name
SD - System description
SC - System capabilities
Address The management address that is advertised.
Notifications Indicates whether LLDP notifications are enabled or disabled.
PVID
Port VLAN ID advertised.
PPVID
Protocol Port VLAN ID advertised.