Reference Guide

Address Table Commands 451
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
Example
The following example displays the port-lock status of all ports.
console# show ports security
Port Status Learning Action Maximum Trap
Frequency
------- -------- --------- ------ --- ------- --------
gi0/1 Enabled Max- Discard 3 Enabled
100
Addresses
gi0/2 Disabled Max- - 28 - -
Addresses
gi0/3 Enabled Lock Discard 8 Disabled -
The following table describes the fields shown above.
show ports security addresses
Use the show ports security addresses Privileged EXEC mode command to
display the current dynamic addresses in locked ports.
Syntax
show ports security addresses [interface-id | detailed ]
Field Description
Port The port number.
Status The port security status. The possible values are: Enabled or
Disabled.
Action The action taken on violation.
Maximum The maximum number of addresses that can be associated on this
port in the Max-Addresses mode.
Trap The status of SNMP traps. The possible values are: Enable or
Disable.
Frequency The minimum time interval between consecutive traps.