Reference Guide

Address Table Commands 439
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
Default Configuration
No addresses are defined.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode. It cannot be
configured for a range of interfaces (range context).
User Guidelines
This command enables adding secure MAC addresses to a routed port in port
security mode. The command is available when the port is a routed port and
in port security mode. The address is deleted if the port exits the security
mode or is not a routed port.
Example
The following example adds the MAC-layer address 00:66:66:66:66:66 to
gi0/1.
console(config)# interface gi0/1
console(config-if)#
port security routed secure-address
00:66:66:66:66:66
show mac address-table
Use the show mac address-table Privileged EXEC mode command to view
entries in the MAC address table.
Syntax
show mac address-table [dynamic | static | secure] [vlan vlan] [interface
interface-id] [address mac-address]
Parameters
• dynamic —Displays only dynamic MAC address table entries.
•
static —Displays only static MAC address table entries.
•
secure —Displays only secure MAC address table entries.
•
vlan —Displays entries for a specific VLAN.