Reference Guide

SNMP Commands 181
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
snmp-server user
Use the snmp-server user Global Configuration mode command to configure
a new SNMP Version user. Use the no form of the command to remove a user.
Use the encrypted form of this command to enter the authentication and
privacy passwords in encrypted form (see SSD).
Syntax
snmp-server user username groupname {v1 | v2c | [ remote host] v3[ auth
{md5 | sha} auth-password [priv priv-password] ]}
no snmp-server user username {v1 | v2c | [remote host] v3[ auth {md5 |
sha}
Parameters
• username —Define the name of the user on the host that connects to the
agent. (Range: Up to 20 characters).
•
groupname —The name of the group to which the user belongs. The group
should be configured using the command snmp-server group with v1 or
v2c parameters (no specific order of the 2 command configurations is
imposed on the user). (Range: Up to 30 characters)
•
v1 —Specifies that the user is a v1 user.
•
v2c —Specifies that the user is a v2c user.
•
v3 —Specifies that the user is a v3 user.
•
remote host —IP address (IPv4, IPv6 or IPv6z) or host name of the remote
SNMP host. See IPv6 Address Conventions.
•
auth —Specifies which authentication level is to be used.
Views Read View name enabling viewing the agent contents. If
unspecified, all objects except the community-table and
SNMPv3 user and access tables are available.
Write View name enabling data entry and managing the agent
contents.
Notify View name enabling specifying an inform or a trap.
Field Description