Reference Guide

148 Configuration & Image File Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Configuration_Image.fm
DELL CONFIDENTIAL – PRELIMINARY 4/3/14 - FOR PROOF ONLY
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to display the active image.
Example
The following example specifies that image-1 is the active system image file
loaded by the device at startup. The results of this command is displayed in
show bootvar.
console# boot system image-1
show running-config
Use the show running-config privileged EXEC command to display the
contents of the currently running configuration file.
show running-config
Parameters
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
Example
The following example displays the running configuration file contents.
console# show running-config
config-file-header
AA307-02
v1.2.5.76 / R750_NIK_1_2_584_002
CLI v1.0
no spanning-tree
interface range gi0/gi0/1-4