Deployment Guide
Table Of Contents
- Microsoft Windows Server 2012 R2 - Hyper-V on Dell PowerEdge VRTX Deployment Guide
- Abbreviations
- Audience
- Scope
- Overview
- Solution requirements
- Hyper-V on the Dell PowerEdge VRTX chassis— deployment workflow
- Configuring components
- Configuring solution for virtualization – Windows Server 2012 R2 Hyper-V
- Installing virtualization infrastructure
- Configuring virtual disk for OS deployment in Dell PowerEdge M630 servers
- Configuring prerequisites to install Windows Server
- Installing Windows Server 2012 R2 operating system in the Dell PowerEdge VRTX
- Enabling Hyper-V and multipath features in Windows Server 2012 R2
- Setting up NIC teaming in Windows Server 2012 R2
- Configuring network in Windows Server 2012 R2
- Sample naming and IP addressing scheme
- Configuring vEthernet switch in Windows Server 2012 R2
- Adding the Dell PowerEdge VRTX servers to the domain
- Assigning virtual disks
- Installing the shared PERC driver
- Adding MPIO settings in Windows Server 2012 R2
- Configuring registry
- Adding volumes in the Dell PowerEdge M630 servers
- Enabling failover clustering in Windows Server 2012 R2
- Creating cluster
- Verifying the deployment
- Appendix A
- Appendix B
Configuring network in Windows Server 2012 R2.............................................................................22
Sample naming and IP addressing scheme ...................................................................................... 23
Configuring vEthernet switch in Windows Server 2012 R2...............................................................23
Adding the Dell PowerEdge VRTX servers to the domain.................................................................24
Assigning virtual disks......................................................................................................................... 24
Installing the shared PERC driver....................................................................................................... 24
Adding MPIO settings in Windows Server 2012 R2............................................................................25
Configuring registry............................................................................................................................ 25
Adding volumes in the Dell PowerEdge M630 servers......................................................................25
Enabling failover clustering in Windows Server 2012 R2.................................................................. 26
Creating cluster...................................................................................................................................26
Validating configuration................................................................................................................26
Creating a Hyper-V host cluster in VMM..................................................................................... 26
9 Verifying the deployment................................................................................. 29
10 Appendix A.........................................................................................................30
11 Appendix B..........................................................................................................31
4










