Users Guide

Figure 7. Cabling for dual Shared PERC 8 External non-fault tolerance mode

NOTE

: In dual Shared PERC 8 External nonfault tolerance mode, the two Shared PERC 8 External controllers are

independent and cannot communicate with each other.

Dual Shared PERC 8 External fault tolerance

1 Turn o the server modules. Click Server Overview → Power → Control → Power O Server for every server.

2 Click Chassis Overview → Power → Control → Power O System to turn o the chassis.

3 Open the system and install two Shared PERC 8 External cards in Slots ve and six.

Deploying the Shared PERC 8 card