Users Guide

Related links
Replacing a Shared PERC 8 External card
Installing a new Shared PERC 8 External card
Single or dual Shared PERC 8 External nonfault tolerance
1 Turn o the server modules.
2 Click Server Overview → Power → Control → Power O Server for every server.
3 Click Chassis Overview → Power → Control → Power O System to turn o the chassis.
4 Open the system and install a maximum of two Shared PERC 8 External cards in Slots 5 and 6.
5 Cable enclosure(s) to Shared PERC 8 External cards using required cabling methodology.
6 Click Chassis Overview → Power → Control → Power On System to turn on the chassis.
NOTE: To transition from one enclosure to two or vice versa, repeat the procedure, except for adding the External cards,
and reconnect the cable as required.
Figure 5. Cabling for Shared PERC 8 External card single enclosure
28
Deploying the Shared PERC 8 card