Reference Guide

88 Configuring System Information
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
The following is an example of the CLI commands:
SNTP Interface Settings
If receiving time information from Anycast servers is enabled, you can
determine through which interface the Anycast packets are sent and received.
If no interface is defined, Anycast requests are not sent.
To enable receiving Anycast updates on an interface:
1
Click System > Time Synchronization > SNTP Interface Settings to
display the
SNTP Interface Settings: Summary page.
The following fields are displayed for every interface for which an SNTP
interface has been enabled:
–
Interface — The port, LAG or VLAN on which SNTP is enabled.
–
Receive Servers Updates — Displays whether the interface is enabled
to receive updates from the SNTP server.
console(config)# sntp server 100.1.1.1 poll key 10
console# show sntp status
Clock is unsynchronized
Unicast servers:
Server Status Last Response Offset Delay
[mSec] [mSec]
----------- --------- ------------- ------ -----
Anycast server:
Server Status Last Response Offset Delay
[mSec] [mSec]
----------- --------- ------------- ------ -----
Broadcast:
Interface IP Address Last Response
------------ --------------- -----------------------
gi0/1 00:00:00.0 Jan 1 2010