Reference Guide

76 Configuring System Information
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
There are two types of DST possible when Others is selected. You can set a
specific date in a particular year, or you can set a recurring setting,
irrespective of the year. For a specific setting in a particular year, complete
the
Daylight Savings area, and for a recurring setting, complete the
Recurring area.
If
Other is selected, the From and To fields must be defined either in the
Non-recurring or Recurring section.
4 To enter non-recurring DST parameters, enter the following fields:
–
From — The time that DST begins. The possible options are:
•
DD/MMM/YY — The date, month, and year at which DST
begins.
•
HH/MM — The time (hour and minutes) at which DST begins.
–
To — The time that DST ends. The possible options are:
•
DD/MMM/YY — The date, month, and year at which DST ends.
•
HH/MM — The time (hour and minutes) at which DST ends.
5 To enter recurring DST parameters, select Recurring and enter the
following fields:
–
From — The time that DST begins each year, for example, DST
begins locally every second Sunday in April at 5:00 am. The possible
options are:
•
Day — The day of the week from which DST begins every year.
•
Week — The week within the month from which DST begins
every year.
•
Month — The month of the year in which DST begins every year.
•
Time — The time at which DST begins every year.
–
To — The recurring time that DST ends each year, for example, DST
ends locally every fourth Friday in October at 5:00 am. The possible
options are:
•
Day — The day of the week at which DST ends every year.
•
Week — The week within the month at which DST ends every
year.
•
Month — The month of the year in which DST ends every year.