Reference Guide

66 Configuring System Information
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
1 Click System > General > Asset in the tree view to display the Asset page.
2 Enter/view the parameters:
–
System Name (0-159 Characters) — Enter the user-defined device
name.
–
System Contact (0-159 Characters) — Enter the name of the contact
person.
–
System Location (0-159 Characters) — Enter the location where the
system is currently running.
–
MAC Address — Displays the device MAC address.
–
OOB MAC Address — Displays the MAC address of the Out-of-Band
port.
–
Sys Object ID — Displays the vendor's authoritative identification of
the network management subsystem contained in the entity.
–
Date — Enter the current date (mandatory). This date can also be
entered in the
Manual Time Settings page. If SNTP has been defined,
but the SNTP server is not available, the switch uses the date and time
in this field and the
Time field.
–
Time — Enter the current time (mandatory). This time can also be
entered in the
Manual Time Settings page. If SNTP has been defined,
but the SNTP server is not available, the switch uses the date and time
in this field and the
Date field.
–
System Up Time — Displays the amount of time since the last device
reset.
–
Service Tag — Displays the service reference number used when
servicing the device.
–
Asset Tag — Enter the Asset Tag (0-16 Characters) for the device.
This is the user-defined reference for the device.
–
Serial No. — Displays the device serial number.