Reference Guide

500 Quality of Service
Defining Policy Binding Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the Policy Binding pages.
The following is an example of the CLI commands:
QoS Statistics
This section describes how to view and manage QoS statistics.
It contains the following topics:
• Policer Statistics
• Aggregated Policer
• Queues Statistics
Policer Statistics
A Single Policer is bound to a class map from a single policy. An Aggregate
Policer is bound to one or more class maps from one or more policies.
Use the Policer Statistics pages to view the number of in-profile and out-of-
profile packets received from an interface that meet the conditions defined in
the class map of a policy.
To view policer statistics:
1
Click Quality of Service  QoS Statistics  Policer Statistics to display the
Policer Statistics: Summary page.
The following statistics for the previously-defined counters are displayed:
–
Interface — Statistics are displayed for this interface.
Table 22-16. Policy Binding CLI Commands
CLI Command Description
service-policy input
policy-map-name
no service-policy
input
Applies a policy map to the input of a particular
interface.
Use the no form of this command to detach a
policy map from an interface.
console(config-if)# service-policy input policy1