Reference Guide

464 Statistics/RMON
Events Log
The Events log displays the log of events that occurred. An event is logged
when the type of the event is Log or Log and Trap. The action in the event is
performed when the event is bound to an alarm (see the Alarms page) and
the conditions of the alarm have occurred.
To display the events log:
•Click Statistics/RMON > RMON > Events Log in the tree view to
display the
Events Control page.
The following fields are displayed:
–
Event — The event identifier.
–
Log No. — The log number.
–
Log Time — Time when the log entry was entered.
–
Description — Description of the log entry.
Viewing Device Events Using the CLI Commands
The following table contains the CLI commands for viewing device events.
The following is an example of the CLI commands:
Table 21-9. Device Event Viewing CLI Commands
CLI Command Description
show rmon log [event] Displays the RMON logging table.
console(config)# rmon event 1 log
console> show rmon log
Maximum table size: 500
Event Description Time
----- --------------- --------------
1 Errors Jan 18 2002 23:58:17
2 High Broadcast Jan 18 2002 23:59:48