Reference Guide

Statistics/RMON 459
Configuring RMON History Control Using the CLI Commands
The following table contains the CLI commands for configuring RMON
history control.
The following is an example of the CLI commands:
History Table
The History Table page displays interface-specific statistical network
samplings. Each table entry represents the counter values compiled during a
single sample.
To display RMON statistics for a specified sample:
1
Click Statistics/RMON  RMON  History Table in the tree view to
display the
History Table page.
2 Select a History Entry No .
The following fields are displayed:
–
Owner — RMON station or user that requested the RMON
information.
–
Sample No. — Number of the specific sample the information in the
table reflects.
Table 21-6. RMON History Control CLI Commands
CLI Command Description
rmon collection stats index
[owner ownername][buckets
bucket-number][interval
seconds]
no rmon collection stats index
Enables and configures RMON on an
interface.
Use the no form of this command to
remove a specified RMON history
group of statistics.
show rmon history index
{throughput|errors|other}[peri
od seconds]
Displays RMON collection history
statistics.
console(config)# interface gi0/8
console(config-if)# rmon collection stats 1 interval
2400