Reference Guide

Statistics/RMON 457
– Jabbers — Number of packets received, longer than 1518 octets
(excluding framing bits, but including FCS octets), and having either
a bad Frame Check Sequence (FCS) with an integral number of
octets (FCS Error), or a bad FCS with a non-integral number of octets
(Alignment Error).
–
Collisions — Number of collisions received on the interface, since the
device was last refreshed.
–
Frames of 64 Bytes — Number of 64-byte frames received on the
interface, since the device was last refreshed.
–
Frames of 65 to 127 Bytes — Number of 65-127-byte frames received
on the interface, since the device was last refreshed.
–
Frames of 128 to 255 Bytes — Number of 128-255-byte frames
received on the interface, since the device was last refreshed.
–
Frames of 256 to 511 Bytes — Number of 256-511-byte frames
received on the interface, since the device was last refreshed.
–
Frames of 512 to 1023 Bytes — Number of 512-1023-byte frames
received on the interface, since the device was last refreshed.
–
Frames of 1024 to Max Octets — Number of 1024-Max Octet frames
received on the interface, since the device was last refreshed.
3 Select one of the Refresh Rate options to specify how frequently the
statistics should be refreshed.
Configuring RMON Statistics Using the CLI Commands
The following table contains the CLI commands for viewing and enabling
RMON statistics.
Table 21-5. Configuring RMON Statistics Using CLI Command
CLI Command Description
show rmon statistics {interface-id} Displays RMON Ethernet
statistics.