Reference Guide

Statistics/RMON 453
The following is an example of the CLI commands:
EAP Statistics
For information about EAP, see
Dot1x Authentication .
To display EAP statistics:
1
Click Statistics/RMON > Table Views > EAP Statistics in the tree view
to display the
EAP Statistics page.
2 Select a port/LAG.
The following fields are displayed:
–
Frames Receive — The number of valid EAPOL frames received on
the port.
–
Frames Transmit — The number of EAPOL frames transmitted via
the port.
–
Start Frames Receive — The number of EAPOL Start frames received
on the port.
–
Log off Frames Receive — The number of EAPOL Logoff frames
received on the port.
–
Respond ID Frames Receive — The number of EAP Resp/ID frames
received on the port.
–
Respond Frames Receive — The number of valid EAP Response
frames received on the port.
console# show gvrp statistics
GVRP Statistics:
----------------
Legend:
rJE : Join Empty Received rJIn: Join In Received
rEmp : Empty Received rLIn: Leave In Received
rLE : Leave Empty Received rLA : Leave All Received
sJE : Join Empty Sent sJIn: Join In Sent
sEmp : Empty Sent sLIn: Leave In Sent
sLE : Leave Empty Sent sLA : Leave All Sent
Port rJE rJIn rEmp rLIn rLE rLA sJE sJIn sEmp sLIn sLE sLA
----- ----- ----- ----- ----- ----- ----- ---- ----- ---- --- ---- ---
gi0/1 1 2 1 4 2 3 4 1 0 0 0 1