Reference Guide

Statistics/RMON 449
– Total Bytes (Octets) — Number of octets transmitted from the
selected interface.
–
Unicast Packets — Number of Unicast packets transmitted from the
selected interface.
–
Multicast Packets — Number of Multicast packets transmitted from
the selected interface.
–
Broadcast Packets — Number of Broadcast packets transmitted from
the selected interface.
4 Click Reset All Counters to clear these counters.
Etherlike Statistics
To display interface error statistics:
1
Click Statistics/RMON > Table Views > Etherlike Statistics in the tree
view to display the
Etherlike Statistics page.
2 Select a port/LAG.
The following fields are displayed:
–
Frame Check Sequence (FCS) Errors — Number of frames received
that are an integral number of octets in length but do not pass the
FCS check.
–
Single Collision Frames — Number of frames that are involved in a
single collision, and are subsequently transmitted successfully.
–
Late Collisions — Number of collisions detected after the first 512
bits of data.
–
Excessive Collisions — Number of frames for which transmission fails
due to excessive collisions.
–
Internal MAC Transmit Errors — Number of frames for which
reception fails due to an internal MAC sublayer receive error.
–
Oversize Packets — Number of frames received that exceed the
maximum permitted frame size.
–
Received Pause Frames — Number of MAC Control frames received
with a PAUSE operation code.
–
Transmitted Pause Frames — Number of MAC Control frames
transmitted on this interface with a PAUSE operation code.