Reference Guide

LLDP 405
The following is an example of the CLI commands:
Neighbors Information
Use the Neighbors Information page to view information that was received in
LLDP advertisements from neighboring devices.
The neighbor’s information is deleted after timeout. Timeout is the
maximum interval that can pass without receiving an LLDP PDU from a
neighbor. The timeout value is computed from the neighbor’s Time to Live
TLV.
To view neighbors information:
1
Click Switching > LLDP > Neighbors Information in the tree view to
display the
Neighbors Information page.
console(config)# interface gi0/3
console(config)# lldp med location civic-address
6162636465
console# show lldp med configuration
Fast Start Repeat Count: 4.
Network policy 1
-------------------
Application type: voiceSignaling
VLAN ID: 1 untagged
Layer 2 priority: 0
DSCP: 0
Port Capabil- Network Location Notif- Inventory
ities Policy ications
---- ------- -------- ------- ------- --------
gi0/1 Yes Yes Yes Enabled No
gi0/2 Yes Yes No Enabled No