Reference Guide

LLDP 403
– Location ECS ELIN (10-25 Bytes in Hex) — Displays the device’s
ECS ELIN location.
5 To view MED details for a port, click Detail and select a port.
The following fields are displayed for the port:
–
Auto-Negotiation Status — Enabled specifies that auto-negotiation is
enabled on the port; Disabled indicates that it is not.
–
Advertised Capabilities — The list of port capabilities advertised for
the port.
–
MAU Type — The Media Attachment Unit type. The MAU performs
physical layer functions, including digital data conversion from the
Ethernet interfaces' collision detection and bit injection into the
network, for example, 100BASE-TX full duplex mode.
–
System Name — The system's assigned name (in alpha-numeric
format). This value equals the sysName object.
–
System Description — A description of the network entity (in alpha-
numeric format). This includes the system's name and versions of the
hardware, operating system, and networking software supported by the
switch. This value equals the sysDescr object.
–
Device ID — The device ID advertised, for example, the device MAC
address.
–
Device Type — The type of device.
–
LLDP MED Capabilities — The TLVs that are advertised by the
port.
–
LLDP MED Device Type — Specifies whether a sender is a network
connectivity device or an endpoint device.
–
Application — The following fields are displayed for each possible
application type:
•
Application Type — The application type.
•
Flags — The VLAN tagging status for the application type:
Tagged or Untagged.
•
VLAN ID — The VLAN number for the application type.
•
User Priority — The user priority for the application type.
•
DSCP — The DSCP value assigned to the network policy.