Reference Guide

388 Multicast Support
The following is an example of the CLI commands:
ipv6 mld last-member-query-
count count
no ipv6 mld last-member-query-
count
Configures the Last Member Query
Counter.
Use the no format of the command to
return to default.
ipv6 mld last-member-query-
interval milliseconds
no ipv6 mld last-member-query-
interval
Configures the Last Member Query
Interval.
Use the no format of the command to
return to default.
ipv6 mld snooping vlan vlan-id
immediate-leave
no ipv6 mld snooping vlan
vlan-id immediate-leave
Enables the MLD Snooping
Immediate-Leave processing on a
VLAN.
Use the no format of the command to
disable MLD Snooping Immediate-
Leave processing.
show ipv6 mld snooping groups
[vlan vlan-id] [address ip-
multicast-address] [source ip-
address]
Displays the Multicast groups learned
by MLD snooping.
show ipv6 mld snooping
interface
vlan-id
Displays MLD snooping configuration.
show ip igmp snooping mrouter
[
interface vlan-id]
Displays information about
dynamically learned Multicast router
interfaces.
console (config)# ip mld snooping
console (config)# interface vlan 1
console (config-if)# ipv6 mld robustness 3
console (config-if)# ipv6 mld snooping mrouter learn-pim-
dvmrp
console (config-if)# ipv6 mld snooping leave-time-out 60
Table 16-6. IGMP Snooping CLI Commands
(continued)
CLI Command Description