Reference Guide

Multicast Support 387
Configuring IGMP Snooping Using CLI Commands
The following table summarizes the CLI commands for configuring IGMP
snooping on a VLAN:
Table 16-6. IGMP Snooping CLI Commands
CLI Command Description
ipv6 mld snooping
no ipv6 mld snooping
Enables MLD Snooping.
Use the no form of this command to
disable MLD Snooping.
ipv6 mld snooping vlan vlan-id
no ipv6 mld snooping vlan
vlan-id
Enables MLD Snooping on a specific
VLAN.
Use the no form of this command to
disable MLD Snooping on a specific
VLAN.
ipv6 mld snooping querier
no ipv6 mld snooping querier
Enables MLD Snooping querier.
Use the no form of this command to
disable IGMP Snooping querier.
ipv6 mld robustness count
no ipv6 mld robustness
Changes the value of the MLD
robustness variable.
Use the no format of the command to
return to default.
ipv6 mld snooping vlan vlan-id
mrouter learn pim-dvmrp
no ipv6 mld snooping vlan
vlan-id mrouter learn pim-
dvmrp
Enables automatic learning of
Multicast router ports.
Use the no format of the command to
return to default.
ipv6 mld query-interval
seconds
no ipv6 mld query-interval
Configures the Query interval.
Use the no format of the command to
return to default.
ipv6 mld query-max-response-
time seconds
no ipv6 mld query-max-
response-time
Configures the Query Maximum
Response time.
Use the no format of the command to
return to default.