Reference Guide

386 Multicast Support
• Operational Query Max Response Interval —Displays the delay used
to calculate the Maximum Response Code inserted into the General
Queries.
•
Last Member Query Counter (1-7) —Enter the Last Member Query
Count to be used if the device cannot derive the value from the
messages sent by the elected querier.
•
Operational Last Member Query Counter —Displays the
operational value of the Last Member Query Counter.
•
Last Member Query Interval (100-25500) —Enter the Maximum
Response Delay to be used if the device cannot read Max Response
Time value from Group-Specific queries sent by the elected querier.
•
Operational Last Member Query Interval —The Last Member
Query Interval sent by the elected querier.
•
Immediate Leave —When enabled, reduces the time it takes to block
unnecessary MLD traffic sent to a device port.
•
MLD Querier Status —Enable or disable MLD querier.
•
MLD Querier Election —Enable or disable MLD election.
•
MLD Querier Version —Select the MLD querier version.
4 Click Apply . The Running Configuration file is updated.