Reference Guide

376 Multicast Support
Managing Bridge Multicast Groups Using CLI Commands
The following table summarizes the CLI commands for managing Multicast
service members as displayed in the Bridge Multicast Group pages.
Table 16-3. Bridge Multicast Group CLI Commands
CLI Command Description
bridge multicast address {mac-
multicast-address | ipv4-
multicast-address} [[add |
remove] {ethernet interface-list
| port-channel port-channel-
list}]
no bridge multicast filtering
{mac-multicast-address}
Registers MAC-layer Multicast
addresses to the bridge table, and
adds static ports to the group.
Use the no form of this command to
disable Multicast address filtering.
bridge multicast forbidden
address
{mac-multicast-address |
ipv4-multicast-address} [add |
remove] {[ethernet interface-
list
| port-channel port-
channel-list}
no bridge multicast forbidden
address {mac-multicast-address}
Forbids adding a specific Multicast
address to specific ports. Use the no
form of this command to return to
default
Use the no form of this command to
restore the default configuration.
bridge multicast source ip-
address group ip-multicast-
address [[add | remove]
{ethernet
interface-list | port-channel
port-channel-list}]
no bridge multicast source ip-
address group ip-multicast-
address
Registers a source IP address -
Multicast IP address pair to the
bridge table, and statically adds or
removes ports to or from the source-
group.
Use the no form of this command to
unregister the source-group-pair.
show bridge multicast address-
table [vlan
vlan-id] [address
{mac-multicast-address | ipv4-
multicast-address | ipv6-
multicast-address}
] [format {ip
| mac}]
Displays Multicast MAC address
table information.