Reference Guide

Multicast Support 375
– Source IP Address — Enter the source IP address to be used in
outgoing packets.
–
Ports — Select the ports to be added to a Multicast service. Toggle a
port to
S to join the port to the selected Multicast group as a static
port. Toggle a port to
F to indicate that it is Forbidden to this service.
Leave the field empty if it is not involved in the VLAN.
–
LAGs — Select the LAGs to be added to a Multicast service. Toggle a
LAG to
S to join the port to the selected Multicast group as a static
LAG. Toggle a port to
F to indicate that it is Forbidden to this service.
Leave the field empty if it is not involved in the VLAN.
The following table describes the codes used for the interface in this page:
Table 16-2. IGMP Port/LAG Members Table Control Settings
Port Control Definition
S Attaches the port to the Multicast group as static member in the static row.
The port/LAG has joined the Multicast group statically in the current row.
F Forbidden. The port cannot belong to the Multicast group.
Blank The port is not attached to a Multicast group, but it is also not forbidden.