Reference Guide

372 Multicast Support
2 Enter the fields:
–
Bridge Multicast Filtering — Enable/disable Multicast filtering.
Enabled is the default value.
–
IGMP Snooping Status — Enable/disable IGMP Snooping on the
device. Disabled is the default value.
–
IGMP Querier Status — Enable/disable IGMP Querier. Disabled is
the default value. Enable IGMP querier if IGMP snooping is enabled.
IGMP querier fills the tables used by IGMP snooping.
–
MLD Snooping Status — Enable/disable MLD Snooping on the
device. Disabled is the default value.
–
MLD Querier Status — Enable/disable MLD Querier on the device.
Disabled is the default value. Enable MLD querier if MLD snooping is
enabled. MLD querier fills the tables used by MLD snooping.
–
VLAN ID — Select the VLAN ID whose forwarding method is set in
the next fields.
–
Forwarding Method for IPv6 —Set one of the following forwarding
methods for IPv6 addresses:
MAC Group Address , IP Group
Address
, or Source Specific IP Group Address .
–
Forwarding Method for IPv4 —Set one of the following forwarding
methods for IPv4 addresses:
MAC Group Address , IP Group
Address
, or Source Specific IP Group Address.