Reference Guide

VLANs 347
– VLAN List (I - Inactive Configuration) — Enter the VLAN(s) to
which this LAG belongs, and indicate its type. The possible options are:
•
T — Tagged. The LAG is a member of a VLAN. All packets
forwarded by the LAG are tagged. The packets contain VLAN
information.
•
U — Untagged. The LAG is a member of a VLAN. Packets
forwarded by the LAG are untagged.
•
F — Forbidden. The LAG is denied membership to a VLAN.
Click
Add to move the LAG to the VLAN list together with its type.
–
Frame Type — Packet type accepted by the LAG. The possible options
are:
•
Admit All — Tagged and untagged packets are both accepted by
the LAG.
•
Admit Tag Only — Only tagged packets are accepted by the LAG.
•
Admit Untagged Only — Only untagged packets are accepted on
the LAG.
–
Ingress Filtering — Enable/disable Ingress filtering by the LAG.
Ingress filtering discards packets that are destined to VLANs of which
the specific LAG is not a member.
–
Native VLAN ID (1-4094) — Enter VLAN used for untagged traffic
to trunk ports, or select
None .
–
Multicast VLAN ID (1-4094) — Enter VLAN used for Multicast TV
VLAN traffic on access ports, or select
None .
–
Customer VLAN ID (1-4094) — Enter VLAN used for customer
ports, or select
None .
Assigning LAGs to VLAN Groups Using CLI Commands
Refer to Table 14-2 for a list of the LAG settings CLI commands.