Reference Guide

Hardware Overview 33
• 10G Ethernet Ports:
tengigabitethernet group / port_number or te group / port_number
In addition, the switch supports an Out-of-Band (OOB) port that is connected
to the management network of the chassis.
Port Types
The following ports are found on the R1-2401 switch:
• 24 x 1G Ethernet Ports. These consist of:
–
8 external ports —Connected to network (visible when the switch is in
the chassis)
–
16 internal ports —Connected to blade servers (not visible when the
switch is in the chassis)
•
1 Out-of-Band port (this port is the same as used for CMC)
The following ports are found on the R1-2210 switch:
• 20 x 10G Ethernet Ports. These consist of:
–
4 external ports —Connected to network (visible when the switch is in
the chassis)
–
16 internal ports —Connected to blade servers (not visible when the
switch is in the chassis)
• 2 x 1G Ethernet Ports
•1 Out-of-Band port
(this port is the same as used for CMC)
Table 3-1 and Table 3-2 map the hardware network port numbers to the
software interface port numbers and describe the short version of the port
name in the CLI/GUI for the R1-2401 and the R1-2210, respectively:
Table 3-1. R1-2401 Port Mapping Table
Port Type and Number Software Port Naming
Convention in CLI/WEB
External 1G ports 1-8/server slot 0 gi0/1.... gi0/8
Internal 1G ports 1-4/server slot 1 gi1/1.... gi1/4
Internal 1G ports 5-8/server slot 2 gi2/1.... gi2/4
Internal 1G ports 9-12/server slot 3 gi3/1.... gi3/4