Reference Guide

Ports 289
back-pressure
no back-pressure
Enables Back Pressure on a given
interface.
Use the no form of this command to
disable back pressure.
flowcontrol {auto|on|off}
no flowcontrol
Configures the flow control on a
given interface.
Use the no form of this command to
disable flow control.
mdix {on|auto}
no mdix
Enables automatic crossover on a
given interface or Port-channel.
Use the no form of this command to
disable cable crossover.
show interfaces configuration
[
interface-id | detailed]
Displays the configuration for all
configured interfaces.
show interfaces advertise
[interface-id | detailed]
Displays the interface’s negotiation
advertisement settings.
show interfaces status
[
interface-id | detailed]
Displays the status for all configured
interfaces.
show interfaces description
[
interface-id | detailed]
Displays the description for all
configured interfaces.
Table 10-8. Port Configuration CLI Commands
(continued)
CLI Command Description