Reference Guide

276 Ports
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
• Link Short-Reach Energy Saving Mode — Globally enable/disable
Short Reach mode.
•
Energy Detect Mode — Globally enable/disable the Energy Detect
mode.
•
Current Power Consumption — Displays the current power
consumption.
•
Power Saving s — Displays the percentage of power saved by running
in Green Ethernet mode.
4 Click LLDP Interface Details .
5 The following is displayed for each port on the device:
–
Port — Port number.
•
Energy Efficient Ethernet .
•
Oper — Displays the operational status of EEE mode.
•
Remote Peer — Displays the operational status of Green Ethernet
on the other side of the link.
•
Short-Reach .
•
Oper — Displays the operational status of Short-Reach mode.
•
Fault Reason — Reason if the operational mode is different than
the administrative mode.
•
Energy Detect .
•
Oper — Displays the operational status of Short-Reach mode.
•
Fault Reason — Reason if the operational mode is different than
the administrative mode.
–
Cable Length (Meter) — Indicates the length of the cable.
Configuring Green Ethernet Using CLI Commands
The following table summarizes the CLI commands for configuring Green
Ethernet.
Table 10-3. Green Ethernet CLI Commands
CLI Command Description
green-ethernet short-reach
no green-ethernet short-reach
Enables/disables Green Ethernet short
reach mode.