Reference Guide

252 Network Security
Configuring Time Ranges Using CLI Commands
The following table summarizes the CLI commands for configuring time
ranges
.
Table 9-11. Time Range CLI Commands
CLI Command Description
time-range time-range-name
no time-range time-range-name
Enables time-range configuration
mode, and defines time ranges for
functions (such as access lists).
Use the no form of this command
to remove the time range
configuration.
absolute start hh:mm day month
year
no absolute start
absolute end hh:mm day month year
no absolute end
Adds start and end times to the
time range.
Use the no form of the commands
to remove the start and end times
from the time range.
periodic day-of-the-week hh:mm to
day-of-the-week hh:mm
no periodic day-of-the-week hh:mm
to day-of-the-week hh:mm
periodic list hh:mm to hh:mm day-
of-the-week1 [day-of-the-week2…
day-of-the-week7]
no periodic list hh:mm to hh:mm
day-of-the-week1 [day-of-the-
week2… day-of-the-week7]
periodic list hh:mm to hh:mm all
no periodic list all hh:mm to
hh:mm all
Adds a recurring time range to the
time range.
Use the no form of the commands
to remove the recurring time
range.