Reference Guide

Network Security 251
3 Enter the name of the time range in the Time Range Name field.
4 Define the Absolute Start time.
– To begin the Time Range immediately, click
Immediate .
– To determine at what time in the future the Time Range will begin,
enter values in the
Date and Time fields.
5 Define the Absolute End time.
– To indicate that the Time Range should not end, click
Infinite .
– To determine the time at which the Time Range ends, enter values in
the
Date and Time fields.
See Configuring Time Ranges Using CLI Commands for the CLI commands
for creating time ranges.
Time Range Recurrence
To add a recurring time range element to an absolute time range:
1
Click Switching > Network Security > Time Range Recurrence to display
the
Recurring Time Range: Summary page.
A daily and weekly recurring element of the time range that is selected is
displayed if they exist.
2 To add a recurring time range element to a time range, click Add.
3 Select the Time Range Name to which you want to add the Time Range
Recurrence. The
Absolute Start and Absolute End fields are displayed.
4 Check if the recurrence is Daily or Weekly in Recurrence type .
5 If the recurrence is Daily , enter:
–
Start Time — Select the time on which the time range starts.
–
End Time — Select the time on which the time range ends.
–
Weekday — Select the day of the week on which the time range
occurs.
6 If the recurrence is Weekly , enter:
•
Start — Select the Day of the Week and Time on which the time
range starts.
•
End —Select the Day of the Week and Time on which the time
range ends.